Are you struggling with a Pit Boss Err Code on your pellet grill? Don’t worry, you’re not alone. Many Pit Boss users have experienced this frustrating issue, which can prevent your grill from operating properly.
But before you go out and buy a new grill, there are some steps you can take to troubleshoot and fix the problem.
In this article, we’ll guide you through a step-by-step troubleshooting process to help you fix the Pit Boss Err Code. We’ll cover the most common causes of the error and provide simple solutions that you can do at home.
So, grab your tools and let’s get started!
Table of Contents
Understanding the Pit Boss Err Code
If your Pit Boss grill is displaying an err code, don’t panic – let’s dive into what it means and how to fix it!
An err code is a message that appears on the digital controller of your grill, indicating that something is not working correctly. This could be due to a range of issues, such as a malfunctioning sensor, a problem with the wiring, or a software glitch. However, understanding the specific err code that your grill is displaying is the first step towards fixing the problem.
When you encounter an err code, the first thing to do is check your Pit Boss manual for a list of error codes and their corresponding meanings. This will help you identify the specific issue that your grill is experiencing.
For instance, err code E1 may indicate a problem with the temperature sensor, while E2 could be related to the auger motor. Once you have identified the err code, you can begin troubleshooting.
There are several steps that you can take to fix the err code, depending on the specific issue. Some common solutions include checking the wiring for loose connections, cleaning the grill to ensure that no debris is blocking the sensors, or resetting the grill by unplugging it and plugging it back in.
However, if the problem persists, it may be necessary to contact Pit Boss customer support or a professional technician for further assistance.
Troubleshooting Step 1: Check the Electrical Connections
Firstly, make sure you’ve thoroughly examined the electrical connections to identify any potential issues with your Pit Boss grill. This is important because loose or disconnected electrical connections can often cause the Pit Boss Err Code.
Check the power cord, the outlet, and the internal wiring to make sure everything is securely connected and not damaged. If you find any loose connections, tighten them up and try to power on the grill again.
Secondly, if the electrical connections seem to be fine, then check the temperature probe. The temperature probe is responsible for measuring the internal temperature of the grill, and if it’s not working properly, it can trigger the Pit Boss Err Code.
Check to make sure the probe is properly inserted into the grill and that it’s not damaged. If you find any issues with the temperature probe, you may need to replace it.
Finally, if you’ve checked the electrical connections and the temperature probe and are still experiencing the Pit Boss Err Code, you may need to reset the grill. To do this, turn off the grill and unplug it from the outlet. Wait for a few minutes, then plug it back in and turn it on again.
This will reset the grill and may help to resolve any issues causing the error code. If the problem persists, consult the user manual or contact customer support for further assistance.
Troubleshooting Step 2: Inspect the Auger Motor
Now it’s time to take a look at your auger motor and see if it’s causing the issue with your grill. You’ll want to make sure it’s properly connected and functioning correctly to ensure a smooth grilling experience. Here are some steps to follow:
First, unplug your grill from the power source and remove the hopper lid to gain access to the auger motor.
Check if there’s any debris or obstruction in the motor that may be causing it to malfunction. If there’s, remove it and clean the motor thoroughly.
Next, inspect the wiring connections to ensure they’re securely fastened and not damaged. If there’re any loose or damaged connections, fix them before attempting to use the grill again.
If after following these steps, you still encounter the err code, it may be necessary to replace the auger motor. However, before doing so, it’s best to consult with the manufacturer or a professional technician to ensure that this is indeed the issue and the correct replacement part is used.
Remember to always prioritize your safety when troubleshooting any electrical equipment, and never attempt to fix any internal parts while the grill’s still plugged in.
Troubleshooting Step 3: Check the Temperature Probe
Don’t let a faulty temperature probe ruin your grilling experience – it’s important to ensure that your food is cooked to perfection. Let’s take a closer look at this crucial component.
The temperature probe is responsible for measuring the internal temperature of your grill, which allows you to monitor the progress of your food. If the probe is not functioning correctly, it can cause your grill to overheat or undercook your food.
To check the temperature probe, start by disconnecting the wires from the control board. Then, use a multimeter to measure the resistance of the probe. The resistance should be between 1000 and 2000 ohms at room temperature. If the reading is outside of this range, or if there is no reading at all, then the probe needs to be replaced.
If the temperature probe is functioning correctly, but you’re still experiencing issues with your grill, it’s time to move on to the next troubleshooting step. We’ll take a closer look at the hopper next, as this component is responsible for feeding pellets into the fire pot.
By following these troubleshooting steps, you can quickly identify and resolve any issues with your Pit Boss grill. This ensures that you can enjoy perfectly cooked food every time.
Troubleshooting Step 4: Inspect the Control Board
One crucial component to inspect when experiencing issues with your grill is the control board, which can have a significant impact on the performance of your Pit Boss. The control board is responsible for regulating the temperature and ensuring that all the parts work together. If it malfunctions, it can cause the grill to stop working altogether or display error codes. Therefore, it’s essential to inspect the control board thoroughly.
To inspect the control board, start by looking for any visible signs of damage, such as burn marks or loose wires. Check that all the wires are connected correctly and that there are no loose connections. Also, make sure that there are no signs of moisture or water damage. If you find any visible damage, you may need to replace the control board.
Another way to determine if the control board is the issue is to run a diagnostic test. Pit Boss grills come with a manual that includes instructions on how to run a diagnostic test. Follow the instructions carefully and pay close attention to any error codes that appear. If you see an error code that indicates a control board issue, you may need to replace it.
| Signs of a Faulty Control Board | What to Do |
|---|---|
| Grill won’t turn on | Check the control board for visible damage and run a diagnostic test |
| Error codes appear on the display | Run a diagnostic test and look for error codes related to the control board |
| Temperature is inconsistent | Check the control board for visible damage and run a diagnostic test |
Inspecting the control board is an essential step in troubleshooting issues with your Pit Boss grill. If you find any visible damage or receive error codes related to the control board, it may be time to replace it. By following these troubleshooting steps, you can identify and fix the issue, ensuring that your grill performs to the best of its ability.
Troubleshooting Step 5: Clean the Grill
Now it’s time to clean your Pit Boss grill. To ensure optimal performance, it’s important to remove any debris or blockages that may have accumulated.
Regular maintenance of your grill will help to prevent future issues and keep it functioning properly.
Removing Debris and Blockages
To get rid of any debris and blockages, you’ll need to take a closer look at the firepot and the auger motor. These are the two main areas where debris and blockages can cause the Pit Boss to display an error code. Here’s how you can clean them up:
| Parts to check | Tools needed | Steps to follow |
|---|---|---|
| Firepot | Shop vac or brush | 1. Turn off the grill and unplug it from the power source. 2. Remove the grates and heat deflector. 3. Use a shop vac or brush to remove any debris in the firepot. 4. Check the holes in the firepot and make sure they are not blocked. |
| Auger motor | Screwdriver and lubricant | 1. Turn off the grill and unplug it from the power source. 2. Remove the hopper and locate the auger motor. 3. Use a screwdriver to remove any debris around the motor. 4. Lubricate the motor with a food-grade lubricant. |
By following these steps, you should be able to remove any debris or blockages that may be causing the error code on your Pit Boss. Once you have cleaned these areas, be sure to test the grill to see if the error code has been resolved. If the error code persists, you may need to move on to the next troubleshooting step.
Maintaining the Grill for Optimal Performance
To keep your Pit Boss grill running smoothly, you should regularly maintain it. Clean the grates to prevent food from sticking and ensure they last longer. Use a wire brush or a grill scraper to remove any residue or debris that may have accumulated on the grates. It’s also a good idea to oil the grates before cooking to prevent food from sticking and to keep them in good condition.
Check the temperature sensors to ensure your grill is heating up properly. If the temperature sensors are not working correctly, your grill may not reach the desired temperature, which can affect the quality of your food.
Inspect the gaskets for wear and tear to prevent heat loss and maintain optimal performance. If you notice any cracks or gaps in the gaskets, you should replace them immediately.
By regularly maintaining your Pit Boss grill, you can ensure that it lasts longer and cooks your food to perfection every time.
Final Thoughts and Preventative Tips
Now that you’ve successfully tackled the issue with your Pit Boss grill and have it running smoothly again, it’s important to discuss some preventative tips to avoid future problems.
Regular maintenance practices like cleaning the grill after each use, checking for loose screws or worn parts, and replacing the pellets as needed can go a long way in preventing issues.
However, if you do encounter a problem that you can’t fix on your own, don’t hesitate to seek professional assistance to ensure that your grill is functioning properly and safely.
Common Maintenance Practices
Regular maintenance practices are crucial to ensure your Pit Boss grill runs smoothly and efficiently. One of the most important maintenance practices is cleaning your grill regularly. This means removing any debris, leftover food, and grease from the grates, burners, and other components. You can use a wire brush or scraper to remove any stubborn residue, and then wipe the grill down with a damp cloth. This not only helps prevent flare-ups and potential fire hazards, but also ensures that your food cooks evenly and doesn’t pick up any unwanted flavors.
In addition to cleaning your grill, it’s also important to inspect it for any signs of wear and tear. This includes checking the burners, hoses, and connections for any cracks or leaks. You should also check the ignition system to make sure it’s working properly. If you notice any issues, it’s important to address them as soon as possible to prevent further damage and ensure your grill continues to work well.
By following these simple maintenance practices, you can help extend the life of your Pit Boss grill and enjoy delicious, perfectly cooked food every time.
When to Seek Professional Assistance
If you’re experiencing issues with your grill that aren’t easily fixable, it’s best to seek professional assistance to ensure your investment is protected and you can continue creating mouth-watering meals for your loved ones.
Some issues, such as electrical problems or major malfunctions, require specialized knowledge to properly diagnose and fix. Attempting to fix these problems on your own can lead to further damage or even pose a safety risk.
Additionally, seeking professional assistance can save you time and money in the long run. Trained technicians have the know-how and equipment to quickly identify and fix issues, preventing them from worsening and potentially causing more expensive repairs down the line.
Don’t hesitate to reach out to a professional if you’re unsure about how to fix an issue or if you’ve attempted to troubleshoot to no avail. It’s always better to be safe than sorry when it comes to your grill and your own safety.
